YK11 | YK-11 SARM Solution 10mg/ml – 50ml

Description

Researchers comparing YK 11 for sale can review the full specification of this listing from Chemyo before ordering. YK11 YK-11 SARM Solution is listed in our liquid SARM research solutions catalog at a labeled format of 10mg/ml – 50ml, with composition, CAS number, storage information and available analytical or quality-control documentation set out on this page.

YK 11 for Sale in a Labeled 10mg/ml Research Solution

Listings of YK 11 for sale differ on three points: the stated concentration, what the compound is dissolved in, and whether the batch analysis is published. This YK-11 solution is prepared at 1% (10mg/ml) in 99% PEG400, so each 50ml bottle carries a fixed concentration rather than a quantity a laboratory has to weigh out before every run. Use the specifications below to compare the exact format and available documentation with your own protocol requirements.

Researchers asking what YK11 is will find it listed here as a selective androgen receptor modulator, with a CAS number of 1370003-76-1, a molar mass of 430.5 g/mol and the chemical formula C25H34O6. Every figure shown is taken from the product record rather than estimated, so anyone weighing a YK 11 for sale listing against another can check them directly against the batch analysis published below.

YK11 YK-11 SARM Solution Research Specifications

Application	Selective Androgen Receptor Modulator
Concentration	1% (10mg/ml)
Composition	99% PEG400, 1% YK-11 (>99% purity)
CAS	1370003-76-1
Molar Mass	430.5 g/mol
Chemical Formula	C25H34O6
Synonyms	YK11
Storage	Minimize open air exposure, store in a cool dry place.
Reports	View Quality Control
Terms	The products we offer are intended for laboratory research use only. Please familiarize yourself with our Terms & Conditions prior to ordering.

Quality & Research Information

Four documents are published for this batch, covering the certificate of analysis, FTIR identity, HPLC purity and concentration testing across three units. That paperwork is what separates one YK11 listing from another, since it confirms the material matches its label before it goes into a study. To check the figures for a batch, view YK11 batch lab reports. Product information is provided for laboratory research use only and is not intended as medical guidance.

Related YK-11 Research Formats

The same compound is carried in other formats: YK11 SARM powder for sale in 1g for protocols that call for weighing material directly, and the YK-11 and MK-677 value pack for paired work in a single order. For a comparable 10mg/ml bottle in the same category, see the LGD-4033 solution for sale. For measuring from a 50ml bottle, a 1ml dropper for research solutions is stocked separately.

Where to Buy YK11 from Chemyo

Listings offering a YK11 SARM solution vary widely in how much they disclose. This Chemyo YK11 listing stays focused on the details researchers need before purchase: a clearly stated concentration, full composition, storage guidance and published quality-control documentation for the batch supplied. Nothing on this page is inferred, and no specification is presented that is not held on record for YK11 YK-11 SARM Solution 10mg/ml – 50ml.

Ready to order YK 11 for sale from Chemyo? Review the specifications and available documentation above before placing your research order. Payment is accepted by crypto, Cash App, Apple Pay and Chime. For laboratory research purposes only. Not intended for human consumption.

What is YK-11?

YK-11 is a synthetic steroidal compound, first reported in Japanese academic work. It is routinely catalogued and discussed alongside SARMs, but it is not a non-steroidal SARM: structurally it is a gene-modified derivative of dihydrotestosterone, named chemically as (17α,20E)-17,20-[(1-methoxyethylidene)bis(oxy)]-3-oxo-19-norpregna-4,20-diene-21-carboxylic acid methyl ester. Laboratory work has examined it in cell culture as a partial androgen receptor agonist and in connection with myostatin-related signalling pathways. There is no human clinical programme for the compound, and no approved use of any kind. Chemsyo lists it as a 10 mg/mL solution in a 50 mL bottle, for in vitro and preclinical research only.

YK-11 names, codes and spellings

The code appears with and without its hyphen, as YK-11 and YK11, and both refer to this same compound. A large share of the search traffic is not commercial but definitional: what is yk11 is one of the most-used phrasings, and the short answer is the steroidal research compound described above. It is also searched as yk11 peptide, which is inaccurate in a way worth stating plainly — there is no amino acid chain in a steroid derivative. Listings may add “SARM” to the name as well. Identity for each lot appears in the published lab reports.

• YK-11
• YK11
• what is yk11
• yk11 peptide (not a peptide)
• YK-11 SARM (steroidal, not a SARM)

YK-11 formats available

Both formats are stocked. This page is the solution: pre-dissolved at a labeled 10 mg/mL, filled into a 50 mL bottle and verified by HPLC as the finished product, so the concentration you work from has been measured in the bottle rather than calculated. The 1 g YK-11 powder is the same compound supplied as solid material, weighed and dissolved by the researcher, which suits work that needs a different vehicle or concentration. Per-batch COA, HPLC and FTIR documents are published for both under the same quality control process.

What is YK11?

YK-11 is a synthetic steroidal compound derived structurally from dihydrotestosterone, first described in Japanese academic research. It has been studied in cell culture as a partial androgen receptor agonist and in relation to myostatin signalling pathways. It is supplied strictly as a research chemical, with no approved human application of any kind.

Is YK11 a SARM or a steroid?

Chemically it is a steroid. YK-11 is catalogued with SARMs and is usually sold beside them, which is where the confusion starts, but selective androgen receptor modulators are non-steroidal by definition and YK-11 is a steroid derivative. Describing it as a steroidal research compound is the accurate wording.

Is YK11 a peptide?

No. The search yk11 peptide is common, yet YK-11 contains no amino acids and no peptide bonds. It is a steroidal small molecule, so peptide handling and storage guidance does not apply to it. The same page and the same batch documents cover every spelling of the code.

YK-11 research reference

Background, molecular data, FAQs and every format in stock are on the YK 11 page. Batch certificates for this product are in the Chemyo lab reports library.