RAD140 | Testolone RAD-140 Solution 10mg/ml – 50ml

Description

Researchers comparing rad 140 for sale can review the full specification of this listing from Chemyo before ordering. RAD140 | Testolone RAD-140 Solution is listed in our liquid SARM research solutions catalog at a labeled format of 10mg/ml – 50ml, with composition, CAS number, storage information and available analytical or quality-control documentation set out on this page.

Buy RAD 140 for Sale in a Labeled 10mg/ml Research Solution

When you compare rad 140 for sale between suppliers, the figures that decide the comparison are concentration, composition and documentation. This Testolone RAD-140 solution is prepared at 1% (10mg/ml) in 99% PEG400, so each 50ml bottle carries a stated concentration rather than a quantity a laboratory has to weigh out before every run. Use the specifications below to compare the exact format, composition and available batch documentation with your own protocol requirements.

Chemyo lists RAD 140 Testolone as a selective androgen receptor modulator with a CAS number of 1182367-47-0 and a molar mass of 393.83 g/mol, and every figure shown here is taken from the product record rather than estimated. The product information is presented to support informed research purchasing and product comparison.

RAD140 Testolone RAD-140 Solution Research Specifications

Application	Selective Androgen Receptor Modulator
Concentration	1% (10mg/ml)
Composition	99% PEG400, 1% RAD140 (>99% purity)
CAS	1182367-47-0
Molar Mass	393.83 g/mol
Chemical Formula	C20H16ClN5O2
Synonyms	RAD140
Storage	Minimize open air exposure, store in a cool dry place.
Reports	View Quality Control
Terms	The products we offer are intended for laboratory research use only. Please familiarize yourself with our Terms & Conditions prior to ordering.

Quality & Research Information

Researchers evaluating RAD140 for sale should check the paperwork as well as the price. Batch documentation for this Testolone RAD-140 solution is published rather than summarized, so the material can be checked against its paperwork before it goes into a study. To confirm the analysis for a batch, view RAD140 batch lab reports. Product information is provided for laboratory research use only and is not intended as medical guidance.

Related RAD-140 Research Formats

Continue browsing the same compound in the other formats this catalog carries: RAD-140 Testolone powder for sale in 1g for protocols that call for weighing material directly, the RAD-140 and MK-677 value pack, or the RAD-140 and GW-501516 value pack for paired work. For measuring from a 50ml bottle, a 1ml dropper for research solutions is stocked separately.

Why Buy RAD 140 for Sale from Chemyo?

This Chemyo RAD 140 listing stays focused on the details researchers need before purchase: a clearly stated concentration, full composition, storage guidance and available quality-control documentation for the batch supplied. Nothing on this page is inferred, and no specification is presented that is not held on record for RAD140 Testolone RAD-140 Solution 10mg/ml – 50ml.

Ready to order RAD 140 for sale? Review the specifications and available documentation above before placing your research order. Payment is accepted by crypto, Cash App, Apple Pay and Chime. For laboratory research purposes only. Not intended for human consumption.

What is RAD-140?

RAD-140, also known as testolone, is a non-steroidal selective androgen receptor modulator (SARM) first described in the literature under that development code by a pharmaceutical research programme. Its full chemical name is 2-chloro-4-[[(1R,2S)-1-[5-(4-cyanophenyl)-1,2,4-oxadiazol-3-yl]-2-hydroxypropyl]amino]-3-methylbenzonitrile: a small synthetic molecule built around an oxadiazole ring, with no amino-acid chain at all, which is why the frequent query “rad 140 peptide” is a misnomer rather than a second product. It was developed to study tissue-selective activity at the androgen receptor and appears in preclinical binding, pharmacokinetic and oncology research. This listing supplies it pre-dissolved as a 10mg/ml solution in a 50ml bottle for laboratory research use only.

RAD-140 names, codes and spellings

Two names are used interchangeably, so the pairings rad 140 testolone, rad-140 testolone, testolone rad-140 and rad140 testolone all describe this compound. The digits get mangled as well: rad 14 is a truncated form, and science rad 140 is usually someone looking for the published research literature. rad 140 drops and rad140 liquid refer to this solution format, while rad 140 peptide names the wrong class, since RAD-140 is a small molecule. Every variant below points to the same compound:

• rad 140 testolone
• rad 140 peptide
• testolone rad-140
• rad-140 testolone
• rad 14
• rad140 testolone
• science rad 140
• rad 140 drops
• rad140 liquid

RAD-140 formats available

Both formats are stocked. This page is the pre-dissolved 10mg/ml solution in 50ml, the format behind searches for rad 140 drops or rad140 liquid, supplied at a labeled concentration verified by HPLC in the finished bottle so that no weighing or solvent preparation is needed. The same compound is listed separately as a 1g testolone powder, which the researcher weighs and dissolves in a chosen vehicle when concentration has to be set in-house. Batch HPLC and FTIR documents for either format are published in the lab reports archive, and the method behind them is described under quality control.

What is RAD-140 (testolone)?

RAD-140, or testolone, is a non-steroidal selective androgen receptor modulator: a small synthetic molecule built around an oxadiazole ring. It was developed to study tissue-selective activity at the androgen receptor and appears in preclinical research. Chemsyo lists it as a solution and as a powder for laboratory research only.

Is RAD-140 a peptide?

No, though rad 140 peptide is searched often enough to look like a real category. RAD-140 has no amino-acid backbone; it is a single small organic molecule of the SARM research class. The queries rad 140 peptide, rad 14 and science rad 140 all lead to this same compound.

What is the difference between the RAD-140 solution and the powder?

The solution is pre-dissolved at a labeled 10mg/ml in a 50ml bottle, with that concentration verified by HPLC in the finished bottle, so nothing is weighed at the bench. The 1g powder is a weighed solid that the researcher dissolves in a vehicle of their choosing. Both carry per-batch documentation.

RAD-140 research reference

Background, molecular data, FAQs and every format in stock are on the Testolone page. Batch certificates for this product are in the Chemyo lab reports library.